���߲ݴ�ý

Journal articles

• Davies GR, Lancaster RJ, Thomas M, Todd I, Stapleton D & Baxter GJ (2024) . Journal of Materials Research and Technology.
• Livera ER, Christofidou K, Miller JR, Chechik L, Ryan D, Shrive J & Todd I (2024) . Materialia, 102163-102163.
• Sinclair L, Hatt O, Clark SJ, Marussi S, Ruckh E, Atwood RC, Jones M, Baxter GJ, Lun Alex Leung C, Todd I & Lee PD (2024) . Materials & Design, 244, 113183-113183.
• Phan MAL, Dew O & Todd I (2024) . Additive Manufacturing, 104145-104145.
• Goodall AD, Chechik L, Livera F & Todd I (2024) . Acta Materialia, 263, 119501-119501.
• Freeman FSHB, Jones L, Goodall A, Ghadbeigi H & Todd I (2024) . Additive Manufacturing Letters, 8.
• Goodall AD, Uramowski J, Sinclair CW, Chechik L & Todd I (2023) . Additive Manufacturing Letters, 7, 100179-100179.
• Chechik L, Goodall AD, Christofidou KA & Todd I (2023) . Scientific Reports, 13.
• Nishanth F, Goodall AD, Todd I & Severson EL (2023) . IEEE Transactions on Energy Conversion, 1-13.
• Barrie C, Fernandez-Silva B, Snell R, Todd I & Jackson M (2023) . Journal of Materials Processing Technology, 315, 117920-117920.
• Goodall AD, Nishanth FNU, Severson EL & Todd I (2023) . Materials Today Communications, 35, 105978-105978.
• Goodall AD, Yiannakou G, Chechik L, Mitchell RL, Jewell GW & Todd I (2023) . Materials & Design, 230, 112002-112002.
• Chechik L & Todd I (2023) . Additive Manufacturing Letters, 6.
• Goodall AD, Chechik L, Mitchell RL, Jewell GW & Todd I (2023) . Additive Manufacturing, 103555-103555.
• Huang Y, Hernandez-Nava E, Hu X, Todd I & Zhu Q (2023) . Scripta Materialia, 223, 115069-115069.
• Freeman F, Chechik L, Thomas B & Todd I (2023) . Journal of Materials Processing Technology, 311, 117823-117823.
• Moosa AU, Hernández-Nava E, Mejbel MK & Todd I (2022) . Advances in Industrial and Manufacturing Engineering, 5, 100102-100102.
• Chechik L, Christofidou KA, Markanday JFS, Goodall AD, Miller JR, West G, Stone H & Todd I (2022) . Materialia, 101643-101643.
• Gao J, Huang Y, Hu X, Wang S, Rainforth WM, Todd I & Zhu Q (2022) . Scripta Materialia, 217, 114770.
• Huang Y, Gao J, Wang S, Guan D, Xu Y, Hu X, Rainforth WM, Zhu Q & Todd I (2022) . Journal of Alloys and Compounds, 903, 163796-163796.
• Huang Y, Gao J, Vorontsov V, Guan D, Goodall R, Dye D, Wang S, Zhu Q, Rainforth WM & Todd I (2022) . Journal of Materials Science & Technology, 124, 217-231.
• Freeman FSHB, Thomas B, Chechik L & Todd I (2022) . Additive Manufacturing Letters, 2.
• Farquhar L, Maddison G, Hardwick L, Livera F, Todd I & Goodall R (2022) . Metals, 12(3).
• Nordin NH, Zhaoyuan LEONG, Goodall R & Todd I (2022) . Journal of Materials Research and Technology.
• Clare AT, Mishra RS, Merklein M, Tan H, Todd I, Chechik L, Li J & Bambach M (2022) . Journal of Materials Processing Technology, 299.
• Jeffs S, Lancaster R, Davies G, Hole W, Roberts B, Stapleton D, Thomas M, Todd I & Baxter G (2021) . Materials, 14(18).
• Chen Y, Clark SJ, Huang Y, Sinclair L, Leung CLA, Marussi S, Connolley T, Magdysyuk OV, Atwood RC, Baxter GJ , Jones MA et al (2021) . Materials Letters, 286.
• Chen Y, Clark SJ, Sinclair L, Leung CLA, Marussi S, Connolley T, Atwood RC, Baxter GJ, Jones MA, Todd I & Lee PD (2021) . Additive Manufacturing, 101969.
• Miller D, Song B, Farnsworth M, Tiwari D, Freeman F, Todd I & Tiwari A (2021) . Procedia CIRP, 104, 1813-1818.
• Chechik L, Boone NA, Stanger LR, Honniball P, Freeman F, Baxter G, Willmott JR & Todd I (2020) . Additive Manufacturing, 101806-101806.
• Chen Y, Clark SJ, Leung CLA, Sinclair L, Marussi S, Olbinado MP, Boller E, Rack A, Todd I & Lee PD (2020) . Applied Materials Today, 20.
• Freeman FSHB, Chechik L & Todd I (2020) . Physics Education, 55(5).
• Katzman M, Mycroft W, Tammas-Williams S, Hernandez-Nava E, Panoutsos G, Todd I & Kadirkamanathan V (2020) . Journal of Intelligent Manufacturing.
• Velasco-Castro M, Hernández-Nava E, Figueroa IA, Todd I & Goodall R (2019) . Heliyon, 5(12).
• Todd MA, Hunt J & Todd I (2019) . Scientific Reports, 9(1).
• Freeman FSHB, Sharp J, Xi J & Todd I (2019) . Additive Manufacturing.
• Snell R, Tammas-Williams S, Chechik L, Lyle A, Hernández-Nava E, Boig C, Panoutsos G & Todd I (2019) . JOM Journal of the Minerals, Metals and Materials Society.
• JENKINS SNM, OULTON TH, HERNANDEZ-NAVA E, GHADBEIGI H, TODD I & GOODALL R (2019) . Mechanics Research Communications.
• Martinez R, Todd I & Mumtaz K (2019) . Virtual and Physical Prototyping, 14(3), 242-252.
• Hernández-Nava E, Mahoney P, Smith CJ, Donoghue J, Todd I & Tammas-Williams S (2019) . Scientific Reports, 9.
• Pham M-S, Liu C, Todd I & Lertthanasarn J (2019) . Nature, 1-1.
• Pham M-S, Liu C, Todd I & Lertthanasarn J (2019) . Nature, 565(7739), 305-311.
• Freeman FSHB, Lincoln A, Sharp J, Lambourne A & Todd I (2019) . Materials and Design, 161, 14-21.
• Liotti E, Kirk CA, Todd I, Knight KS & Hogg SC (2019) . Journal of Alloys and Compounds, 781, 1198-1208.
• Hancock D, Homfray D, Porton M, Todd I & Wynne B (2018) . Journal of Nuclear Materials, 512, 169-183.
• Bajaj P, Wright J, Todd I & Jägle EA (2018) . Additive Manufacturing.
• Hancock D, Homfray D, Porton M, Todd I & Wynne B (2018) . Fusion Engineering and Design, 136(Part A), 454-460.
• Smith CJ, Tammas-Williams S, Mahoney PS & Todd I (2018) . Materials Today Communications, 16, 22-25.
• Boone NA, Zhu C, Smith C, Todd I & Willmott J (2018) . Additive Manufacturing, 22, 601-605.
• Leong Z, Todd I & Goodall R (2018) . Scripta Materialia, 146, 95-99.
• Todd I (2018) . Nature Materials, 17(1), 13-14.
• Alali M, Todd I & Wynne BP (2017) . Materials and Design, 132, 448-448.
• Hnatkova E, Hausnerova B, Hales A, Jiranek L, Derguti F & Todd I (2017) . Powder Technology.
• Todd I (2017) . Nature, 549(7672), 342-343.
• Leong Z, Huang Y, Goodall R & Todd I (2017) . Materials Chemistry and Physics.
• Smith CJ, Tammas-Williams S, Hernandez-Nava E & Todd I (2017) . Scientific Reports, 7(1).
• Alali M, Todd I & Wynne BP (2017) . Materials & Design, 130, 488-500.
• Harrison N, Todd I & Mumtaz K (2017) . Journal of Materials Science, 52(17), 10517-10525.
• Hernández-Nava E, Tammas-Williams S, Smith C, Leonard F, Withers PJ, Todd I & Goodall R (2017) . Metals, 7(8), 300-300.
• Tammas-Williams S, Withers PJ, Todd I & Prangnell PB (2017) . Scientific Reports, 7.
• Hosnie SM, Ismail MH, Yahaya M, Haris NAB & Todd I (2017) Fabrication of porous β-type Ti-40Nb alloys incorporated with TiH2 via powder metallurgy processing route under reducing environment. Journal of Mechanical Engineering, SI 2(2), 99-112.
• Vora P, Martinez R, Hopkinson N, Todd I & Mumtaz KA (2017) . Technologies, 5(2).
• Gulenko A, Forto Chungong L, Gao J, Todd I, Hannon AC, Martin RA & Christie JK (2017) . Physical Chemistry Chemical Physics, 19(12), 8504-8515.
• Morrish SJN, Pedersen M, Wong KFW, Todd I & Goodall R (2017) . Materials Letters, 190, 138-142.
• Pitt K, Lopez O, Lafferty AD, Todd I & Mumtaz KA (2017) . Composites Science and Technology, 138, 32-39.
• Leong Z, Wrobel J, Dudarev S, Goodall R, todd I & Nguyen-Manh D (2017) . Scientific Reports, 7.
• Tammas-Williams S & Todd I (2016) . Scripta Materialia.
• Smith CJ, Gilbert M, Todd I & Derguti F (2016) . Structural and Multidisciplinary Optimization, 54(5), 1297-1313.
• Tammas-Williams S, Withers P, Todd I & Prangnell PB (2016) . Scripta Materialia, 122, 72-76.
• Guan D, Rainforth WM, Sharp J, Gao J & Todd I (2016) . Journal of Alloys and Compounds, 688, 1141-1150.
• Sidambe AT, Todd I & Hatton PV (2016) . Powder Metallurgy, 59(1), 57-65.
• Tammas-Williams S, Withers PJ, Todd I & Prangnell PB (2016) . Metallurgical and Materials Transactions A, 47(5), 1939-1946.
• Hernández-Nava E, Smith CJ, Derguti F, Tammas-Williams S, Leonard F, Withers PJ, Todd I & Goodall R (2016) . Acta Materialia, 108, 279-292.
• Thomas M, Baxter GJ & Todd I (2016) . Acta Materialia, 108, 26-35.
• Ozdemir Kilinc Z, Hernandez-Nava E, Tyas A, Warrena, JA, Fay SD, Goodall R, Todd I & Askes H (2016) . International Journal of Impact Engineering, 89, 49-61.
• Smith CJ, Derguti F, Hernandez Nava E, Thomas M, Tammas-Williams S, Gulizia S, Fraser D & Todd I (2016) . Journal of Materials Processing Technology, 229, 128-138.
• (2016) . British Journal of Cardiology.
• García-Escorial A, Natale E, Cremaschi VJ, Todd I & Lieblich M (2015) . Revista de Metalurgia, 51(4), e054-e054.
• Nnamchi PS, Obayi CS, Todd I & Rainforth MW (2015) . Journal of the Mechanical Behavior of Biomedical Materials, 60, 68-77.
• Faraji M, Wilcox DP, Thackray R, Howe AA, Todd I & Tsakiropoulos P (2015) . Metallurgical and Materials Transactions B, 46(6), 2490-2502.
• Amendola A, Hernández-Nava E, Goodall R, Todd I, Skelton RE & Fraternali F (2015) . Composite Structures, 131, 66-71.
• Ismail MH, Mohamad Nor NH, Davies HA & Todd I (2015) . Jurnal Teknologi, 76(11).
• Mumtaz KA, Harrison N & todd I (2015) . Acta Materialia, 94, 59-68.
• Chen SS & Todd I (2015) . Journal of Alloys and Compounds, 646, 973-977.
• Vora P, Mumtaz KA, Todd I & Hopkinson N (2015) . Additive Manufacturing, 7, 12-19.
• Domínguez LA, Goodall R & Todd I (2015) . Materials Science and Technology, 31(10), 1201-1206.
• Tammas-Williams S, Zhao H, Léonard F, Derguti F, Todd I & Prangnell PB (2015) . Materials Characterization, 102, 47-61.
• Brif Y, Thomas M & Todd I (2015) . Scripta Materialia, 99, 93-96.
• Gao J, Sharp J, Guan D, Rainforth WM & Todd I (2015) . Acta Materialia, 86, 208-215.
• Hernández-Nava E, Smith CJ, Derguti F, Tammas-Williams S, Léonard F, Withers PJ, Todd I & Goodall R (2015) . Acta Materialia, 85, 387-395.
• García-Escorial A, Natale E, Cremaschi VJ, Todd I & Lieblich M (2015) . Journal of Alloys and Compounds, 643, S199-S203.
• Faraji M, Wilcox DP, Thackray RP, Todd I, Howe AA & Tsakiropoulos P (2014) . Materials Science and Technology (United Kingdom), 30(10), 1177-1188.
• Hunt J, Derguti F & Todd I (2014) . Ironmaking and Steelmaking, 41(4), 254-256.
• Ismail MH, Bram M, Barbosa APC, Koehl M, Davies HA & Todd I (2013) Phase Transformation Temperatures (PPTs) and Microstructure of Moulded NiTi Alloy Using a Water Soluble Binder System. SAINS MALAYSIANA, 42(12), 1769-1773.
• Sidambe A, Derguti F & Todd I (2013) Influence of processing on the properties of IN718 parts produced via Metal Injection Moulding. Powder Injection Moulding International, 7(4), 65-69.
• Sidambe AT, Choong WL, Hamilton HGC & Todd I (2013) . Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 568, 220-227.
• Vora P, Derguti F, Mumtaz K, Todd I & Hopkinson N (2013) Investigating a semi-solid processing technique using metal powder bed Additive Manufacturing processes. 24th International SFF Symposium - An Additive Manufacturing Conference, SFF 2013, 454-462.
• Chen SS, Zhang HR & Todd I (2013) . Scripta Materialia.
• Salisbury L, Shiels J, Todd I & Dennis M (2013) . Physiotherapy Theory and Practice, 29(1), 31-40.
• Figueroa IA, Baez-Pimiento S, Plummer JD, Novelo-Peralta O, Davies HA & Todd I (2012) A detailed study of metallic glass formation in copper-hafnium-titanium alloys. Acta Metallurgica Sinica (English Letters), 25(6), 409-419.
• Sidambe AT, Figueroa IA, Hamilton HGC & Todd I (2012) . Journal of Materials Processing Technology, 212(7), 1591-1597.
• (2012) . Heart, 98(8), 672.1-672.
• Sidambe AT, Derguti F & Todd I (2012) Microstructure of metal injection moulded Ti-6Al-4V after thermo-chemical treatment. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012, 3.
• Figueroa IA, Lara-Rodriguez GA, Novelo-Peralta O, Plummer JD & Todd I (2012) . Journal of Materials Science, 1-7.
• Plummer JD & Todd I (2012) . Philosophical Magazine, 92(23), 2894-2910.
• Ismail MH, Goodall R, Davies HA & Todd I (2012) Formation of microporous NiTi by transient liquid phase sintering of elemental powders. Materials Science and Engineering C.
• Cunliffe A, Plummer J, Figueroa I & Todd I (2012) . Intermetallics, 23, 204-207.
• Plummer JD, Figueroa IA & Todd I (2012) Phase stability, microstructure and mechanical properties of Li containing Mg-based bulk metallic glass composites. Materials Science and Engineering A.
• Cunliffe A, Plummer J, Figueroa I & Todd I (2012) Glass formation in a high entropy alloy system by design. Intermetallics.
• Ismail MH, Goodall R, Davies HA & Todd I (2012) . Materials Letters, 70, 142-145.
• Sidambe AT, Derguti F & Todd I (2011) Fatigue behaviour of Ti6Al4V and CPTi components processed by metal injection moulding. Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011, 2.
• Corteen J, Rainforth M & Todd I (2011) . Scripta Materialia, 65(6), 524-527.
• Sidambe AT, Figueroa IA, Hamilton HGC & Todd I (2011) TAGUCHI OPTIMIZATION OF MIM TITANIUM SINTERING. INTERNATIONAL JOURNAL OF POWDER METALLURGY, 47(6), 21-28.
• Ristić R, Babić E, Pajić D, Zadro K, Figueroa IA, Davies HA, Todd I, Kuršumović A & Stubičar M (2011) Mechanical and magnetic properties of Cu55 Hf45 - x Tix metallic glasses. Solid State Communications.
• Risti R, Babi E, Paji D, Zadro K, Figueroa IA, Davies HA, Todd I, Kurumovi A & Stubiar M (2011) . Solid State Communications, 151(14-15), 1014-1017.
• Ristić R, Babić E, Stubičar M, Kuršumović A, Cooper JR, Figueroa IA, Davies HA, Todd I, Varga LK & Bakonyi I (2011) Simple correlation between mechanical and thermal properties in TE-TL (TE = Ti,Zr,Hf;TL = Ni,Cu) amorphous alloys. Journal of Non-Crystalline Solids.
• Plummer JD, Goodall R, Figueroa IA & Todd I (2011) . Journal of Non-Crystalline Solids, 357(3), 814-819.
• Plummer JD & Todd I (2011) . Applied Physics Letters, 98(2).
• Al-Bermani SS, Blackmore ML, Zhang W & Todd I (2010) . Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41(13), 3422-3434.
• Sidambe AT, Figueroa IA, Hamilton H & Todd I (2010) Metal injection moulding of Ti-64 components using a water soluble binder. Powder Injection Moulding International, 4(4), 52-62.
• Faraji M, Thackray R, Todd I & Tsakiropoulos P (2010) Classification and rating of inclusions in a high carbon steel. TMS Annual Meeting, 25-36.
• Faraji M, Thackray R, Todd I & Tsakiropoulos P (2010) Rating inclusions in an as-cast carbon steel. AISTech - Iron and Steel Technology Conference Proceedings, 841-848.
• Plummer JD, Goodall R, Figueroa IA & Todd I (2010) A study of mechanical homogeneity in as-cast bulk metallic glass by nanoindentation. Journal of Non-Crystalline Solids.
• Al-Bermani SS, Blackmore ML, Zhang W & Todd I (2010) The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1-13.
• Yamada K, Miura N, Yamamoto A, Figueroa IA, Davies HA & Todd I (2010) . Defect and Diffusion Forum, 297-301, 702-707.
• Ristić R, Babić E, Pajić D, Zadro K, Kuršumović A, Figueroa IA, Davies HA, Todd I, Varga LK & Bakonyi I (2010) . Journal of Alloys and Compounds, 504(SUPPL. 1).
• Gonzalez S, Figueroa IA, Zhao H, Davies HA, Todd I & Adeva P (2009) . INTERMETALLICS, 17(11), 968-971.
• Gonzalez S, Figueroa IA & Todd I (2009) . J ALLOY COMPD, 484(1-2), 612-618.
• Faraji M, Todd I & Jones H (2009) . METALL MATER TRANS A, 40A(7), 1710-1715.
• Plummer JD, Figueroa IA, Hand RJ, Davies HA & Todd I (2009) . J NON-CRYST SOLIDS, 355(6), 335-339.
• Figueroa IA, Davies HA & Todd I (2009) . PHILOS MAG, 89(27), 2355-2368.
• Ismail MH, Subuki I, Omar MA, Todd I & Davies HA (2008) Properties of MIM gas-atomized 316L stainless steel using a palm stearin developed in Malaysia. Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2008, 2, 269-274.
• Yamada K, Shinagawa N, Sogame M, Figueroa IA, Davies HA & Todd I (2008) . Defect and Diffusion Forum, 283-286, 533-538.
• Figueroa IA, Davies HA & Todd I (2007) . ChemInform, 38(27).
• Figueroa IA, Davies HA, Todd I & Yamada K (2007) . ADV ENG MATER, 9(6), 496-499.
• Garces G, Maeso M, Todd I, Perez P & Adeva P (2007) . J ALLOY COMPD, 432(1-2), L10-L14.
• Singh R, Hunter J, Philip A & Todd I (2006) . Clinical Rehabilitation, 20(2), 149-152.
• Harrison NJ, Davies HA & Todd I (2006) . J APPL PHYS, 99(8).
• Todd I (2005) , 237-281.
• Faraji M, Todd I & Jones H (2005) . J MATER SCI, 40(24), 6363-6365.
• Ourfali MF, Todd I & Jones H (2005) Effect of solidification cooling rate on the morphology and number per unit volume of primary Mg2Si particles in a hypereutectic Al-Mg-Si alloy. METALL MATER TRANS A, 36A(5), 1368-1372.
• Todd I, Chlup Z, O’Dwyer JG, Lieblich M & García-Escorial A (2004) . Materials Science and Engineering: A, 375-377, 1235-1238.
• Jirattiticharoean W, Jones H, Atkinson HV, Todd I & Kapranos P (2004) Thixoforming of aluminium 7xxx alloys produced using a cooling slope. Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004, 999-1008.
• Isles C, Armstrong G, Begg A, Bowbeer J, Breslin A, Brown A, Campbell N, Chappell F, Gillies J, Green B , Gunn A et al (2003) The SIGN guideline on cardiac rehabilitation. British Journal of Cardiology, 10(1), 29-34.
• Kuijpers NCW, Kool WH, Koenis PTG, Nilsen KE, Todd I & van der Zwaag S (2002) . MATER CHARACT, 49(5), 409-420.
• Chen SP, Van Der Zwaag S & Todd I (2002) . Metallurgical and Materials Transactions A, 33(3), 529-537.
• Vooijs, S.B. Davenpor, I. Todd, S. SI (2001) . Philosophical Magazine A, 81(8), 2059-2072.
• Todd I, Tate BJ, Davies HA, Gibbs MRJ, Kendall D & Major RV (2000) Magnetic properties of ultrasoft nanocomposite FaAlSiBNbCu alloys. Journal of Magnetism and Magnetic Materials, 215-216, 272-275.
• Warren PJ, Todd I, Davies HA, Cerezo A, Gibbs MRJ, Kendall D & Major RV (1999) Partitioning behaviour of Al in a nanocrystalline Fe71.5Si13.5B9Nb3Cu1Al2 alloy. SCRIPTA MATER, 41(11), 1223-1227.
• Frost M, Todd I, Davies HA, Gibbs MRJ & Major RV (1999) Evolution of structure and magnetic properties with annealing temperature in novel Al-containing alloys based on Finemet. Journal of Magnetism and Magnetic Materials, 203, 85-87.
• Tate BJ, Parmar BS, Todd I, Davies HA, Gibbs MRJ & Major RV (1998) Soft magnetic properties and structures of nanocrystalline Fe-Al-Si-B-Cu-Nb alloy ribbons. Journal of Applied Physics, 83, 6335-6337.
• Todd I & Jones H (1997) The effect of added silicon and magnesium on the cell spacing of alpha Al in Bridgman solidified Al-0.25 to 0.75 wt.% Fe alloys. SCRIPTA MATER, 37(7), 915-919.
• Todd I, Donald S & Pentland B (1995) . Reviews in Clinical Gerontology, 5(3), 321-328.
• Lewin B, Cay EL, Todd I, Soryal I, Goodfield N, Bloomfield P & Elton R (1995) The Angina Management Programme: A rehabilitation treatment. British Journal of Cardiology, 2(8), 221-226.
• Genç K, Toyting S, Galindo-Nava E, Todd I & Mumtaz K () . The International Journal of Advanced Manufacturing Technology.
• Berry J, Snell R, Anderson M, Owen LR, Messé OMDM, Todd I & Christofidou KA () . Advanced Engineering Materials.
• Gülenç İT, Bai M, Mitchell RL, Todd I & Inkson BJ () . Rapid Prototyping Journal.
• Chechik L, Christofidou KA, Farquhar L, Tse M, Baxter G & Todd I () . Metallurgical and Materials Transactions A.
• Chechik L, Christofidou KA, Farquhar L, Tse M, Baxter G & Todd I () . Metallurgical and Materials Transactions A.
• Atalay S, Squire PT, Todd I, Davies HA & Gibbs MRJ () . INTERMAG 2000 Digest of Technical Papers. 2000 IEEE International Magnetics Conference.
• Davenport SB, Todd I & van der Zwaag S () . Materials Science Forum, 331-337, 443-448.
• Stanger L, Rockett T, Lyle A, Davies M, Anderson M, Todd I, Basoalto H & Willmott JR () . Sensors, 21(14), 4859-4859.

Chapters

• Snyder C, Attanasio S, White T, Buller D, Jones T, Morris R, Sutliff J, Adams J & Todd I (2022) , Progress in Additive Manufacturing 2021 (pp. 123-139). ASTM International
• Tammas-Williams S & Todd I (2017) , Laser-Based Additive Manufacturing of Metal Parts (pp. 217-238). CRC Press
• Chang I, Zhao Y, Dunkley J, Chen GZ, Suryanarayana C, Ivanov E, Chang I, Simchi A, Nojoomi A, Todd I , Sidambe AT et al (2013) , Advances in Powder Metallurgy (pp. xi-xiv). Elsevier
• Todd I & Sidambe AT (2013) In Chang I & Zhao Y (Ed.), Advances in powder metallurgy: Properties, Processing and Applications (pp. 109-146). Cambridge, United Kingdom: Woodhead Publishing Limited.
• () CRC Press
• Tammas-Williams S, Donoghue J, Withers PJ, Todd I & Prangnell P () , Proceedings of the 13th World Conference on Titanium (pp. 1447-1452). John Wiley & Sons, Inc.
• Cornide J, Dahlborg U, Leong Z, Dominguez LA, Juraszek J, Jouen S, Hansen T, Wunderlich R, Chambreland S, Todd I , Goodall R et al () , TMS2015 Supplemental Proceedings (pp. 1147-1155). John Wiley & Sons, Inc.

Conference proceedings papers

• Atkins C, Chahid Y, Lister G, Tuck R, Kotlewski R, Snell RM, Livera ER, Faour M, Deffley R, Todd I , Shipley J et al (2024) . Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VI, 16 June 2024 - 22 June 2024.
• Atkins C, Chahid Y, Wells JT, Westsik M, Morris K, Breen C, Macleod A, Bissell L, Cochrane W, Kotlewski R , McPhee S et al (2023) . Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems IV, 20 August 2023 - 25 August 2023.
• Atkins C, van de Vorst B, Conley A, Farkas S, Hugot E, Mező G, Morris K, Roulet M, Snell RM, Tenegi Sanginés F , Todd I et al (2022) . Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V, 17 July 2022 - 23 July 2022.
• Snell RM, Atkins C, Schnetler H, Chahid Y, Beardsley M, Harris M, Zhang C, Pears R, Thomas B, Saunders H , Sloane A et al (2022) . Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V, 17 July 2022 - 23 July 2022.
• Paenoi J, Bourgenot CJ, Atkins C, Snell RM, Todd I, White P, Parkin K, Ryder D, Kotlewski R, McPhee S , Chanchaiworawit K et al (2022) . Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V, 17 July 2022 - 23 July 2022.
• Alharbi A, Khan A, Todd I, ramadan M & Mumtaz K (2021) . Materials Today: Proceedings. Uttarakhand, India, 1 May 2021 - 2 May 2021.
• Snell RM, Atkins C, Schnetler H, Todd I, Hernández-Nava E, Lyle AR, Maddison G, Morris K, Miller C, Roulet M , Hugot E et al (2020) . Proceedings of SPIE, Vol. 11451. Online conference, 14 December 2020 - 18 December 2020.
• Roulet M, Atkins C, Hugot E, Snell R, van de Vorst B, Morris K, Marcos M, Todd I, Miller C, Dufils J , Farkas S et al (2020) . 3D Printed Optics and Additive Photonic Manufacturing II, Vol. 11349, 6 April 2020 - 10 April 2020.
• Boig C, Burkinshaw M & Todd I (2018) The application of additive manufacturing to turbomachinery. Institution of Mechanical Engineers - 13th International Conference on Turbochargers and Turbocharging 2018 (pp 261-269)
• Thompson A, Tammas-Williams S, Senin N, Todd I & Leach R (2018) Correlating volume and surface features in additively manufactured metal parts. Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing (pp 116-120)
• Todd I (2017) Improving uptake of cardiac rehabilitation. Practitioner, Vol. 261(1808) (pp 17-20)
• Gilbert M, Smith C, He L, Todd I & Pritchard T (2017) Optimization-driven conceptual design tool for AM components. Simulation for Additive Manufacturing 2017, Sinam 2017, Vol. 2017-October (pp 173-174)
• Cornide J, Calvo-Dahlborg M, Chambreland S, Asensio Dominguez L, Leong Z, Dahlborg U, Cunliffe A, Goodall R & Todd I (2015) . Acta Physica Polonica A, Vol. 128(4) (pp 557-561)
• Dahlborg U, Cornide J, Calvo-Dahlborg M, Hansen TC, Leong Z, Asensio Dominguez L, Chambreland S, Cunliffe A, Goodall R & Todd I (2015) . Acta Physica Polonica A, Vol. 128(4) (pp 552-557)
• Sidambe AT, Todd I & Hatton PV (2015) Effects of build orientationinduced surface modifications on thein-vitro biocompatibility of electron beam melted Ti-6Al-4V. Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition
• Cornide J, Dahlborg U, Leong Z, Dominguez LA, Juraszek J, Jouen S, Hansen T, Wunderlich R, Chambreland S, Todd I , Goodall R et al (2015) (pp 1147-1155)
• Hnatkova E, Bleyan D, Hausnerova B, Hales A, Jiranek L, Derguti F & Todd I (2014) Comparative study of partially water-soluble metal injection moulding feedstock based on inconel 718: The effect of polyethylene glycol molecular weight on rheology and debinding. Euro PM 2014 Congress and Exhibition, Proceedings
• Sidambe AT, Derguti F & Todd I (2013) Characteristics of IN718 parts produced by Metal Injection Moulding. Euro PM2013 Congress & Exhibition 2013, Vol. Volume 1 (pp 427-432). Shewsbury, United Kingdom, 15 September 2013 - 18 September 2013.
• Smith C, Todd I & Gilbert M (2013) Utilizing additive techniques to fabricate weight optimized components designed using structural optimization methods. 24th Annual Solid Freeform Fabrication Symposium (pp 879-894). Austin, Texas
• Sidambe AT, Derguti F & Todd I (2012) . Key Engineering Materials, Vol. 520 (pp 145-152). Switzerland, 5 December 2011 - 7 December 2011.
• Sidambe AT, Figueroa IA, Hamilton H, Todd I & IOP (2011) . TRENDS IN AEROSPACE MANUFACTURING 2009 INTERNATIONAL CONFERENCE, Vol. 26
• Sidambe AT, Figueroa IA, Ismail MH, Hamilton H & Todd I (2009) Effects of boron addition on microstructure and mechanical properties of Ti-6Al-4V metal injection moulding components using a water soluble binder.. EuroPM 2009 Powder Metallurgy World Congress, Vol. Vol. 2 (pp 35-40). Shewsbury, 12 October 2009 - 14 October 2009.
• Figueroa IA, Zhao H, Gonzalez S, Davies HA & Todd I (2008) . JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 354(47-51) (pp 5181-5183)
• Damonte LC, Pasquevich AF, Mendoza-Zelis LA, Vargas IAF, Davies HA & Todd I (2007) . PHYSICA B-CONDENSED MATTER, Vol. 398(2) (pp 480-483)
• Figueroa IA, Davies HA & Todd I (2007) . JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 434 (pp 164-166)
• Figueroa IA, Rawal R, Stewart P, Carroll PA, Davies HA, Jones H & Todd I (2007) . JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 353(8-10) (pp 839-841)
• Pawlik P, Pawlik K, Davies HA, Kaszuwara W, Wyslocki JJ, Harrison N & Todd I (2006) . JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 423(1-2) (pp 99-101)
• Faraji M, Todd I & Jones H (2006) The effect of casting variables on the structure of hypereutectic Al-Si alloys. ALUMINIUM ALLOYS 2006, PTS 1 AND 2, Vol. 519-521 (pp 1741-1746)
• Iqbal Y, Davies HA, Gibbs MRJ, Woodcock TR, Todd I & Major RV (2002) Nanocrystalline powder cores for high frequency applications. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 242 (pp 282-284)
• Hanlon DN, Todd I, Peekstok E, Rainforth WM & van der Zwaag S (2001) The application of laser scanning confocal microscopy to tribological research. WEAR, Vol. 250 (pp 1159-1168)
• Borrego JM, Conde A, Todd I, Frost M, Davies HA, Gibbs MRJ, Garitaonandia JS, Barandiaran JM & Greneche JM (2001) Nanocrystallite compositions for Al- and Mo-containing Finemet-type alloys. JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 287(1-3) (pp 125-129)
• Minguez P, Davies HA, Todd I, Gibbs MRJ, Garcia-Arribas A & Gutierrez J (2001) The magnetoelastic properties of as-quenched and annealed Fe73.5-xAlxSi13.5B9Cu1Mo3 (x=0, 2,4, 6) alloys. JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 287(1-3) (pp 428-431)
• Todd I, Tate BJ, Davies HA, Gibbs MRJ, Kendall D & Major RV (2000) Magnetic properties of ultrasoft-nanocomposite FeAlSiBNbCu alloys. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 215 (pp 272-275)
• Atalay S, Squire PT, Todd I, Davies HA & Gibbs MRJ (2000) Magnetoelastic properties of Al-substituted finemet alloys. Digests of the Intermag Conference
• Frost M, Todd I, Davies HA, Gibbs MRJ & Major RV (1999) Evolution of structure and magnetic properties with annealing temperature in novel Al-containing alloys based on Finemet. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 203 (pp 85-87)
• Todd I, Davies HA, Gibbs MRJ, Leccabue F & Watts BE (1999) The effect of ambient gases on surface quality and related properties of nanocrystalline soft magnetic ribbons produced by melt spinning. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 197 (pp 196-198)
• Todd I, Davies HA, Gibbs MRJ, Kendall D & Major RV (1999) Soft magnetic properties and structure of nanocrystalline alloys based on Finemet. ADVANCED HARD AND SOFT MAGNETIC MATERIALS, Vol. 577 (pp 493-498)
• Tate BJ, Parmar BS, Todd I, Davies HA, Gibbs MRJ & Major RV (1998) Soft magnetic properties and structures of nanocrystalline Fe-Al-Si-B-Cu-Nb alloy ribbons. JOURNAL OF APPLIED PHYSICS, Vol. 83(11) (pp 6335-6337)
• Todd I & Jones H (1996) The effect of cumulative alloying additions on intermetallic phase selection in alloys based on A1-0.5 wt%Fe. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 201-206)
• Sidambe AT, Todd I & Hatton P () . Materials Science Forum, Vol. 828-829 (pp 145-151)
• Chlup Z, Todd I, Garcia Escorial A, Lieblich M, Chlupová A & O'Dwyer JG () . Materials Science Forum, Vol. 426-432 (pp 2417-2422)
• Tate BJ, Parmar BS, Todd I, Davies HA, Gibbs MRJ & Major RV () . 7th Joint MMM-Intermag Conference. Abstracts (Cat. No.98CH36275)
• Jiranek L, Sidambe AT, Derguti F, Latham D & Todd I () Sinter Joining of Metal Injection Moulded Superalloy Components. EuroPM 2012 Powder Metallurgy World Congress. Basel, Switzerland, 16 September 2012 - 19 September 2012.
• Hamilton GC, Sidambe AT, Rowsell L, Conway C, Marsh P, Ashworth M, Davernport AJ, Ward M, Todd I, van der Lingen E & Chown LH () Improved Titanium Powder Metal Injection Molding Using Platinum Group Metals. Powder Processing, Consolidation and Metallurgy of Titanium. Brisbane, Australia, 5 December 2011 - 7 December 2011.
• Ismail MH, Sidambe AT, Figueroa I, Davies HA & Todd I () Effect of Powder Loading on Rheology and Dimensional Variability of Porous, Pseudo-Elastic Niti Alloy Produced by Metal Injection Moulding (MIM) Using a Partly Water Soluble Binder. EuroPM 2010 Powder Metallurgy World Congress. Florence, Italy, 10 October 2010 - 14 October 2010.
• Sidambe AT, Xu W, Figueroa IA, Hamilton H & Todd I () Rapid debinding of a Titanium injection moulded component.. EuroPM 2008 Powder Metallurgy World Congress, Vol. Vol. 2 (pp 275-280). 2008, 28 September 2008 - 1 October 2008.
• Sidambe AT, Figueroa IA, Hamilton H & Todd I () Sintering study of CP-Ti and Ti6V4Al metal injection moulding parts using Taguchi method.. Euro PM 2009 Proceedings, Vol. Vol. 2 (pp 67-72). Copenhagen, 12 October 2009 - 14 October 2009.
• Sidambe AT, Figueroa IA, Hamiltom H & Todd I () Improved Processing of Titanium Alloys by Metal Injection Moulding.. IOP Conference Series: Materials Science and Engineering, Vol. 26(1). Rotherham, 9 September 2009 - 10 September 2009.

Patents

• Todd I & Lambourne A (2017) Method of manufacturing a magnetically graded material. US20170169945A1 (US). Appl. 15 Jun 2017.
• Todd I () Additive layer manufacturing method. US20140367367A1 (US). Appl. 01 Jan 1970.
• Todd I () Metal coil fabrication. 2021/0408859 A1 Appl. 01 Jan 1970.

Presentations

• Todd I .

Preprints

• Atkins C, Chahid Y, Lister G, Tuck R, Kotlewski R, Snell RM, Livera ER, Faour M, Todd I, Deffley R , Shipley J et al (2024) Targeting low micro-roughness for 3D printed aluminium mirrors using a hot isostatic press, arXiv.
• Chechik L, Goodall A, Christofidou K & Todd I (2023) , Research Square Platform LLC.
• Goodall AD, Yiannakou G, Chechik L, Mitchell RL, Jewell GW & Todd I (2023) , Elsevier BV.
• Roulet M, Atkins C, Hugot E, Snell R, van de Vorst B, Morris K, Marcos M, Todd I, Miller C, Dufils J , Farkas S et al (2020) Use of 3D printing in astronomical mirror fabrication, arXiv.
• Chen Y, Clark SJ, Sinclair L, Leung CLA, Marussi S, Connolley T, Magdysyuk OV, Atwood RC, Baxter GJ, Jones MA , McCartney DG et al (2020) In situ and Operando X-ray Imaging of Directed Energy Deposition Additive Manufacturing, arXiv.
• Amendola A, Hernandez-Nava E, Goodall R, Todd I, Skelton RE & Fraternali F (2015) On the additive manufacturing, post-tensioning and testing of bi-material tensegrity structures, arXiv.
• McCormac J, Skillen I, Pollacco D, Faedi F, Ramsay G, Dhillon VS, Todd I & Gonzalez A (2013) A Search for Photometric Variability Towards M71 with the Near-Infrared Transiting ExoplanetS Telescope, arXiv.
• Chechik L & Todd I () .
• Gülenç İT, Bai M, Mitchell RL, Todd I & Inkson BJ () .
• Freeman F, Jones L, Goodall AD, Ghadbeigi H & Todd I () .
• Chechik L, Goodall AD, Christofidou KA & Todd I () .
• Freeman F, Chechik L, Thomas B & Todd I () .
• Livera ER, Christofidou KA, Ryan D & Todd I () .
• Barrie C, Fernandez-Silva B, Snell R, Todd I & Jackson M () .
• Freeman F, Thomas B, Chechik L & Todd I () .